---
title: "A 3D-Printed Planter for a Postcard Rack"
description: "I bought a wire postcard rack secondhand and designed 3D-printed pots that hang in its pockets and drain into each other. Here it is three-plus years later."
url: https://www.joekarlsson.com/blog/from-digital-design-to-real-world-object-creating-a-3d-printed-postcard-planter-rack/
---

Feb 27, 2023 (Updated Nov 7, 2026 ) | 3 min read | [Homelab](https://www.joekarlsson.com/blog/category/homelab/)

# I turned a used postcard rack into a 3D-printed planter tower

![The postcard rack planter, its pockets full of 3D-printed pots and plants](https://www.joekarlsson.com/images/blog/from-digital-design-to-real-world-object-creating-a-3d-printed-postcard-planter-rack/thumb-af923799.still.webp)

**Blog** I bought a wire postcard rack secondhand and designed 3D-printed pots that hang in its pockets and drain into each other. Here it is three-plus years later.

**TL;DR** I filled a secondhand wire postcard rack with 3D-printed pots I designed in Tinkercad. Each pot drains into the one below, so I water the top and the whole tower gets it. Three-plus years in, the ABS is holding up and the succulents gave way to spider plants. The STL is free on Thingiverse.

On this page

1.  [The pots](https://www.joekarlsson.com/blog/from-digital-design-to-real-world-object-creating-a-3d-printed-postcard-planter-rack/#the-pots)
2.  [Watering from the top](https://www.joekarlsson.com/blog/from-digital-design-to-real-world-object-creating-a-3d-printed-postcard-planter-rack/#watering-from-the-top)
3.  [Three-plus years later](https://www.joekarlsson.com/blog/from-digital-design-to-real-world-object-creating-a-3d-printed-postcard-planter-rack/#three-plus-years-later)

I bought a wire postcard rack secondhand with no idea what to do with it. It’s a gold wire tower of little pockets, each one sized for a stack of postcards, and it sat around my house for a while.

I love using vertical space for plants, and the pockets turned out to be about the right shape for a small pot. So I designed one that hangs where the postcards used to go and printed enough to fill the rack. That was early 2023. Here’s what it looks like now, me included.

A quick tour of the rack, November 2026.

**Want to print your own?** The file is free on Thingiverse: [download the Postcard Rack Planter](https://www.thingiverse.com/thing:5867063). There’s also a [project page](https://www.joekarlsson.com/work/postcard-rack-planter/) with the build in three steps.

## The pots

I designed the pot in Tinkercad, which is about as simple as 3D modeling gets: you drag boxes and cylinders around and subtract one from the other. That was plenty for this. The pot is an angled box that sits in a wire pocket the way a stack of postcards would.

I printed them in black ABS on my Prusa MK3. If you print your own from the [Thingiverse file](https://www.thingiverse.com/thing:5867063), keep in mind your rack’s pockets probably aren’t the same size as mine, so measure one and scale the model before you print a whole set.

## Watering from the top

**Every pot has drainage holes in the bottom, and each one sits over the pot below it.** So I water the top row, and the water runs down through the tower and waters everything on the way.

I think that’s the best part. A tower of small pots would be a chore to water one at a time.

## Three-plus years later

The ABS is holding up better than I expected. After almost four years of wet soil next to a sunny window, the pots look about the same as the day I printed them.

When I first planted it, every pocket had a small succulent in it:

![The postcard rack planter in February 2023, standing by a window: the gold wire rack with rows of black 3D-printed pots, each with a small succulent](https://www.joekarlsson.com/images/blog/from-digital-design-to-real-world-object-creating-a-3d-printed-postcard-planter-rack/IMG_2833-Medium.webp) _February 2023, freshly planted_

![Close-up of the black 3D-printed pots hanging in the gold wire pockets, planted with succulents](https://www.joekarlsson.com/images/blog/from-digital-design-to-real-world-object-creating-a-3d-printed-postcard-planter-rack/IMG_2834-Medium.webp) _The pots in the wire pockets_

![Looking up at the bottoms of the black pots in the wire frame, where the drainage holes sit over the pot below](https://www.joekarlsson.com/images/blog/from-digital-design-to-real-world-object-creating-a-3d-printed-postcard-planter-rack/IMG_2853-Medium.webp) _From below_

These days it’s mostly spider plants, and you can barely see the rack. I think it looks best in winter, when everything outside is dead and there’s a green tower next to my window.

## Works on My Machine

Get the next post by email. My newsletter covers homelab builds, AI tools and open source, and it goes out when I have something to say.

It's free, and you can unsubscribe anytime. You'll get an email to confirm first.

![Joe Karlsson at his desk, chin on hand, with a microphone in front of him](https://www.joekarlsson.com/images/about/collage/studio.webp)

Joe  
Karlsson

I write about my homelab, AI tools, databases, and the weird stuff I build on the side.

[More about me →](https://www.joekarlsson.com/about/)

[Bluesky](https://bsky.app/profile/joekarlsson.com) | [LinkedIn](https://www.linkedin.com/in/joekarlsson/) | [GitHub](https://github.com/JoeKarlsson)
